Advertisement
Fit a 10 mm hex-head wrench or the wrench
included in the vehicle toolkit, code 251415,
in the seat indicated above on the left hand
Tonneau Cover kinematics.
Turn the hex-head wrench counterclockwise to
lock the left hand Tonneau Cover kinematics.
Fit a 10 mm hex-head wrench or the wrench
included in the vehicle toolkit, code 251415,
in the seat indicated above on the right hand
Tonneau Cover kinematics.
Turn the hex-head wrench clockwise to lock the
right hand Tonneau Cover kinematics.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Supporting the weight of the rear roof shell as
shown in the photo aside, move it into the
respective seat.
Advertisement
