Advertisement
Refit the engine compartment cosmetic shields (
Connect the battery (
Replacing the engine compartment lid striker plate
Tightening torque
Fastening striker plate - engine compartment lid
Located on the inner side of the engine compartment lid, toward the front.
F2.01).
Close the engine compartment lid, checking that
it closes correctly and is flush with the
bumper.
If the engine compartment lid closes incorrectly
or is not flush with the surrounding bodywork,
adjust the engine compartment lid lock by
adjusting the three respective fastener screws.
E3.13).
Screw
Undo the four screws indicated fastening the
engine compartment lid striker plate (A).
Remove the engine compartment lid striker plate
(A) from the relative seat and replace.
Fit the new engine compartment lid striker plate
(A) in the relative seat.
Tighten the four screws indicated fastening the
engine compartment lid striker plate (A).
Tightening torque
Screw
Nm
Class
13 Nm
B
Nm
Class
13 Nm
B
Advertisement
