Advertisement
Disconnect the battery (
F2.01).
CAUTION
If the RHT open or close cycle is not completed,
the hydraulic system remains pressurised for
up to 5 minutes after the control button is
released. After this period, the system emits a
warning sound to warn the driver and any
persons in the vicinity that the system is no
longer pressurised and that components of the
RHT system may drop without warning.
Electrically bring the RHT into the intermediate
position, with the Rear Roof shell over the
Front Roof shell and with the Tonneau Cover
completely opened.
Remove the indicated clamps.
Release clamps (1).
Undo the screws (2).
Disconnect the connector (3).
Ease out and remove safety catch (4).
NEVER touch the pins with your bare hands,
as this may damage the pins themselves.
Wear appropriate gloves.
Using a suitable extractor, disconnect pins (5)
from connector (3).
Note the colour and locations of the pins (5) to
ensure that they are connected correctly
during reassembly.
Advertisement
