Advertisement
Pour the fluid drained from the system into a container and seal it. DO NOT DISPOSE OF USED
FLUID IN THE ENVIRONMENT.
Open the hydraulic pump tank filler plug and collect the oil by pouring it into a newly opened and clean
container.
Refitting the RHT hydraulic system pump
Tightening torque
Hydraulic pipe clamp forks - pump
Hydraulic pump - left hand Tonneau Cover
kinematics
Before removing any fastener clamps and/or clips in the electronic system and/or hydraulic system,
note the number and position of the components to ensure that they are refitted correctly during
reassembly.
Turn the hydraulic pump (A) upside down and
note the exact position of the hydraulic pipes.
Each pipe is marked with a number indicated
also on the hydraulic pump (A) in the
relevant seat on the pump to avoid incorrect
pipe refitting.
Undo the six indicated screws fastening the
retainer forks (2) of the hydraulic pipes.
Detach the retainer forks (2) of the hydraulic
pipes from the hydraulic pump (A).
Plug immediately the oil outlet orifices on the
hydraulic pump (A).
Remove the hydraulic pipe unions (3) from the
relevant retainer forks (2).
Retrieve the retainer forks (2) of the hydraulic
pipe unions (3).
Screw
M6x22 screws
Nm
Class
7 Nm
A
9 Nm
B
Advertisement
