Advertisement
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
Manually move the Front and Rear Roof shells together into the luggage compartment.
Disconnect the three connectors (20) from the
RHT wiring harness.
Fasten the RHT assembly lifting hook
(AS
107567) to the hydraulic hoist (OMCN
Art. GP05/DE).
Take care not to scratch or damage the rear
screen; protect adequately.
Position the lifting hook in the vehicle, as shown
in the photo, lining up with the holes on the
RHT assembly brackets.
Fasten the RHT assembly lifting hook, by
tightening the nuts and screws indicated
completely.
Note the position of all the screws fastening
the RHT components to facilitate correct
reassembly.
Undo the front right screw (21) on the RHT
assembly.
Advertisement
