Advertisement
Remove the adhesive fixing the cable grommet
(1).
Detach the cable grommet (1) from the relative
seat on the left hand side of the firewall.
Remove the Bowden cable (A) from the relative
seat on the left hand side of the firewall.
UP TO Ass.ly No. 86053
Undo the screw (2) fastening the wiring harness
(C)
Move the wiring harness aside (C) and undo the
five screws indicated fastening the tray (D).
Remove the tray (D) from the relative seat.
UP TO Ass.ly No. 86053
Remove the adhesive fixing the cable grommet
(3).
Detach the cable grommet (3) from the relative
seat on the right hand side of the firewall.
Remove the Bowden cable (A) from the relative
seat on the right hand side of the firewall.
Remove the dual Bowden cable (A) from the
engine compartment and replace.
Fit the new Bowden cable (A) in the relative seat
on the right hand side of the firewall.
Fit the cable grommet (3) in the relative seat on
the right hand side of the firewall, ensuring
that it sits flush with the surface.
Apply adhesive biSil to fix the cable grommet (3).
Advertisement
