Advertisement
Sand with P400 (dry) or P800 (wet)
Envirobase
Deltron D8105
Envirobase
Deltron D8105
Notes:
-
D8105 can be replaced by D8109 if the Fade-out technique is required .
-
The following system is required if on the car the Colour Code label indicates "WATERBORNE
TECHNOLOGY".
-
If a damaged part has to be repaired without replacing it, it is absolutely necessary to sand the OE
Clear thoroughly. Superficial sanding can result in adhesion problems.
-
Panel repair - also of adjacent parts – is recommended for optimum scratch resistance!
Approved Topcoats to be used with this Repair System
see technical datasheet "125 – Envirobase"
see technical datasheet "170 – Deltron D8105"
see technical datasheet "125 – Envirobase"
see technical datasheet "171 – Deltron D8109"
Advertisement
