Advertisement
Bring the RHT electrically into the Coupé position, completing the closing cycle.
Open the luggage compartment lid.
Refit the luggage compartment trim panels (
Refit the rear trim panel.
Replacing the flap kinematics
Tightening torque
Fastening flap kinematics to passenger
compartment upper lateral trim panels
Remove the passenger compartment trim panels (
Remove the upper lateral trim panel.
Carefully remove the strip of adhesive tape (16)
applied previously to block the flap (H) in the
open position.
Attach the clip (15) fastening the flap control
cable (G) for the right hand Tonneau Cover
kinematics.
Attach the spring (1) for the flap control cable (G)
to the Rear Roof shell kinematics.
Refit the safety clip (14).
E4.07).
Screw
E4.04).
Nm
Class
2.6 Nm
B
Advertisement
