Advertisement
If the difference between the calculated value and the value currently displayed is less than 6 Km, the range
value displayed is altered by 1 Km.
If the range drops below 50 Km, no more range information is visualised (although the range count
continues), and the message "Warning - Limited cruising range" is displayed for 20 seconds, followed by
the indication "----".
In the event of changes to the fuel level (refuelling or loss of fuel), the new range value is displayed
immediately. If the new range value is still less than the limit value after fuel has been added, no range
information is given and the display continues to read "----".
In the event of vehicle stoppage with the engine running (e.g. traffic lights or queues), the last value prior to
the stoppage is displayed for 5 minutes, after which the indication "----" is displayed (range calculation is
continued). Range display resumes normally once the vehicle starts moving with an updated value taking
the fuel consumed during the stoppage into account and considering the driving style used during the last
5 minutes prior to the stoppage.
The value is displayed with a resolution of 1 km (or mile) and a calculation precision of +/- 1 Km.
The maximum displayable value is 3000 Km (miles).
The minimum displayable value is 50 Km (miles), after which the value is replaced with dashes "--------".
If any event that needs to be displayed occurs while in TRIP A/B screen mode, the TRIP info will be shown in
reduced size.
This excludes faults detected by the TPMS system, where the system has identified the relative tyre.
At the end of the display cycle, the information in the TRIP screen will be available in full size again, and, if
applicable, the relative summary symbol for the fault will be displayed in the specific area C1 until the fault
has been rectified.
MENU screen
Access the MENU screen with the DISPLAY button.
The MENU screen may be displayed in a number of levels:
Advertisement
