Advertisement
If any event that needs to be displayed occurs while in TYRES screen mode, the screen is displayed in
reduced size.
This excludes faults detected by the TPMS system, where the system has identified the relative tyre.
At the end of the display cycle, the information in the TYRES screen will be available in full size again, and, if
applicable, the relative summary symbol for the fault will be displayed in the specific area C1 until the fault
has been rectified.
TRIP A/B screen
Press the DISP button to access the TRIP A/B screen.
The currently active TRIP counter is shown on the display ("TRIP A" or "TRIP B").
TRIP B may be disabled from the set-up menu: TRIP A is always enabled.
The TRIP A/B screen contains information concerning the following parameters:
Maximum speed during trip (Km/h - mph);
Average driving speed (Km/h - mph);
Travel distance (Km - mi);
Journey time (hh:mm);
Range (Km – mi).
Date (Day Month Year)
The TRIP information displayed is same whether the metric or "imperial" system is selected: only the unit of
Advertisement
