Advertisement
Engage the separator tool
relative lever (5) or manual screw
mechanism, to ensure that the vertical
position (along the "Z" axis) of the striker
plate is correct.
Tighten the two screws indicated fastening the
striker plate (A) to the Tonneau Cover.
Tightening torque
M6x25 Screw
Release the separator tool
relative lever or manual screw mechanism,
and remove.
Remove the locator template from between the
striker plate (A) and the hook (B) of the Rear
Roof shell
(AV
8180).
(AV
8179) using the
Nm
Class
8 Nm
B
(AV
8179) using the
Advertisement
