Advertisement
Bring the RHT electrically into the Coupé position, completing the closing cycle.
Lower the quarterlights with the power window controls.
To prevent damage to the vehicle, ensure
that the Rear Roof shell fastener hooks
are completely and correctly opened
before operating the RHT roof electrically.
Electrically bring the RHT into the intermediate
position, with the Rear Roof shell over the
Front Roof shell and with the Tonneau Cover
completely opened.
Loosen the two screws indicated fastening the
striker plate (A) to the Tonneau Cover.
If necessary, add or remove a number of the
special shims (4) between the striker plate (A)
and the Tonneau Cover, to the total thickness
necessary to obtain the nominal longitudinal
distance (along the "X" axis).
Loosely tighten the two screws indicated
fastening the striker plate (A) to the Tonneau
Cover.
Advertisement
