Advertisement
Attach the clip (7) fastening the left hand flap
control cable (C) to the right hand Tonneau
Cover kinematics.
Attach the spring (8) for the left hand flap control
cable (C) to the Rear Roof shell kinematics.
Refit the safety clip (2).
Attach the clip (7) fastening the right hand flap
control cable (C) to the right hand Tonneau
Cover kinematics.
Attach the spring (8) for the right hand flap
control cable (C) to the Rear Roof shell
kinematics.
Refit the safety clip (2).
Apply and tighten the two screws (6) fastening
the left hand Tonneau Cover kinematics (B)
to the bodyshell.
Tightening torque
M8x50 screw
Nm
Class
20 Nm
A
Advertisement
