Advertisement
Carefully fit the flap control cable (G) into the
respective seat.
Arrange the flap control cable (G) so that is does
not obstruct the movement of the RHT during
the subsequent steps.
Fit the upper lateral trim panel (F) in the
respective seat, feeding the seat belts (A)
and (B) through the respective holes in the
upper lateral trim panel (F).
The rear seat belt (B) is installed in the 2+2
version only.
Pushing outwards manually, fasten the upper
lateral trim panel, installing the relative
mounting bracket in its original position on the
rubber spacer (H).
Advertisement
