Advertisement
Removing the Tonneau Cover
Before removing any fastener clamps and/or clips in the electronic system and/or hydraulic system,
note the number and position of the components to ensure that they are refitted correctly during
reassembly.
Lower the door windows and quarterlights completely.
Open the luggage compartment lid, turning the key in the relative lock.
Remove the luggage compartment lid (
Leave the hinges fastened to the luggage compartment lid.
Remove the luggage compartment trim panels (
Remove the rear right and left hand trim panels only.
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
Manually move the Rear Roof shell to bring it over the Front Roof shell.
E3.02).
E4.07).
Fit a 10 mm wide hex-head wrench in the seat
indicated on both the left and right hand Rear
Roof shell kinematics.
On the right hand Rear Roof shell kinematics,
turn the hex-head wrench counterclockwise to
release the right hand Rear Roof shell
kinematics.
On the left hand Rear Roof shell kinematics, turn
the hex-head wrench clockwise to release the
left hand Rear Roof shell kinematics.
Fit a 10 mm wide hex-head wrench in the seat
indicated on both of the Tonneau Cover
kinematics.
On the right hand Tonneau Cover kinematics,
turn the hex-head wrench counterclockwise to
release the right hand Tonneau Cover
kinematics.
On the left hand Tonneau Cover kinematics, turn
the hex-head wrench clockwise to release the
left hand Tonneau Cover kinematics.
Advertisement
