Advertisement
CAUTION
Take particular care not to damage the locator pins for the Tonneau Cover kinematics.
Remove the Tonneau Cover kinematics, lifting out.
Refitting the Tonneau Cover kinematics
Tightening torque
Rear fastener between Tonneau Cover
kinematics and bodyshell
Front fastener between Tonneau Cover
kinematics and bodyshell
Located at the sides of the luggage compartment, under the trim panels.
The following procedure is for refitting the right hand Tonneau Cover kinematics.
The procedure for refitting the left hand Tonneau Cover kinematics is essentially the same, with a few
variations.
CAUTION
Take particular care not to damage the locator pins for the Tonneau Cover kinematics.
Fit the Tonneau Cover kinematics, lowering delicately onto the respective locator pins.
Undo the two rear screws (3) fastening the
Tonneau Cover kinematics (A).
M8x50 screw
M10x75 screw
Nm
Class
20 Nm
A
43 Nm
B
Advertisement
