Advertisement
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Hold up the Rear Roof shell (1) and remove the
rod
(AV
8178) fitted previously.
Manually move the Rear Roof shell (1) towards
the front of the vehicle, bringing it over the
Front Roof shell.
Move the RHT roof electrically into the Coupé
position, WITHOUT closing the hooks and
ensure that there are no sounds of metallic
contact and that the rear screen (10) is higher
(along the "Z axis") than the Front Roof shell
(11) by max 6 mm.
Lift the flap of the headliner and check that the
bracket (12) is inserted by approximately 2
mm into the rubber endstop (13).
If the bracket is NOT in contact with the endstop
or inserted excessively, adjust as follows.
Advertisement
