Ferrari California Workshop Manual page 1166

Refitting the F1 shift paddles
Tightening torque
Fastening F1 shift paddles
Undo the two upper screws fastening the F1 shift
paddles.
Disconnect the connector (4) and remove the F1
shift paddles.
Screw
Fit the F1 shift paddles onto the steering column,
ensuring the cables are routed correctly, and
connect the connector (4).
Tighten the two upper screws fastening the F1
shift paddles.
Tightening torque
Screw
Nm Class
4 Nm B
Nm Class
4 Nm B