Download Print this page

Ferrari California Workshop Manual page 1410

Hide thumbs Also See for California:

Advertisement

Deltron D8105
Deltron BC
Deltron D8109
Notes:
-
D8105 can be replaced by D8109 if the Fade-out technique is required .
- The following system is required if on the car the Colour Code label indicates "WATERBORNE
TECHNOLOGY".
-
If a damaged part has to be repaired without replacing it, it is absolutely necessary to sand the OE
Clear thoroughly. Superficial sanding can result in adhesion problems.
-
Panel repair - also of adjacent parts – is recommended for optimum scratch resistance!
CeramiClearTM warranty repair system, compliant (low VOC, european legislation) with sanding, for Steel
substrates, total or partly respray, for stonechipping areas and tintable surfacer.
Cleaning / Sanding
Putty / Filler
Primer
Surfacer
Basecoat(s)
Clearcoat(s)
for detailed information see chapter / section "Sanding and Cleaning".
Cleaning
Clean any old paint (OE finish) thoroughly with water first to remove any water soluble dirt.
Clean with a suitable pre-cleaner, e.g. D837 (DX330) Spirit Wipe o D845 (DX310) High
Strength Degreaser. If there is any VOC legislation in force, use D8401 Waterborne low VOC
Cleaner.
Dry Sanding (rotary-orbital machine)
Use the following paper grades depending on the substrate. Use a guide coat for best results:
Wet Sanding (manual)
Do not wet sand
Cleaning
Clean with a suitable pre-cleaner, e.g. D837 DX330 Spirit Wipe o D845 DX310 High Strength
Degreaser. If there is any VOC legislation in force, use D8401 Waterborne low VOC Cleaner.
Overcoat any exposed Aluminium within 4 hours.
see technical datasheet "170 – Deltron D8105"
see technical datasheet "02 – Deltron BC"
see technical datasheet "171 – Deltron D8109"
Bare Steel
see below
Galvaplast 77
Universal 831
Deltron D821 HS
Envirobase
Deltron D8105
Deltron D8109
Substrate Preparation and Cleaning
Aluminium /
Magnesium
OE Finish / Repair
Coatings
Substrates
Galvanized Steel
see below
Galvaplast 77
Universal 831
Deltron D821 HS
Envirobase
Deltron D8105
Deltron D8109
P150 - P220, 3M Scotch-Brite ™ red pad,
3M Soft Pad superfine
P240 - P400, 3M Scotch-Brite ™ red pad,
3M Soft Pad superfine
Galvaplast 77
E-Coat (spare
parts)
see below
Deltron D821 HS
Envirobase
Deltron D8105
Deltron D8105
Deltron D8109
Deltron D8109
OE Finish
see below
Envirobase

Advertisement

loading