Advertisement
Check again that the roller (2) DOES NOT turn.
If the pawl can still turn, the striker plate must
be adjusted again as the vertical position of
the striker plate (along the "Z" axis) is
incorrect.
Fit the checking template
placing the fixed part against the hook (B)
and bringing the mobile part against the Rear
Roof shell striker plate (A).
Using the checking template
again that the longitudinal distance (along
the "X" axis) between the Rear Roof shell
striker plate (A) and hook (B) is 17 ± 2 mm.
If this is not the case, the striker plate must be
adjusted again as the longitudinal position of
the striker plate (along the "X" axis) is
incorrect.
With cylindrical roller only
Insert the feeler gauge
the right-hand side of the hook (B) and the
striker plate (A).
If the feeler gauge does not fit, the striker plate
must be adjusted again as the lateral
position of the striker plate (along the "Y"
axis) is incorrect.
(AV
8182) again,
(AV
8182), check
(AV
8181) again between
Advertisement
