Advertisement
The operations described as follows are for one side of the vehicle only and must therefore be
repeated on the opposite side of the vehicle.
After replacing the complete retractable hard top, ALWAYS carry out the adjustment procedure for the
relative receivers and striker plates.
Adjust the Rear Roof shell striker plates on the Tonneau Cover (
DO NOT refit the passenger compartment trim panels and luggage compartment trim panels.
To carry this procedure out correctly, the axis
must be oriented as indicated in the figure
aside.
E6.11).
Electrically bring the RHT into the intermediate
position, with the Rear Roof shell over the
Front Roof shell and with the Tonneau Cover
completely opened.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Open the luggage compartment lid, pressing on
the two hooks (15) (one per side) fastening
the luggage compartment lid to the Tonneau
Cover kinematics.
Advertisement
