Advertisement
Remove the left hand headliner flap tensioner
cable (E) from the Front Roof shell
kinematics, leaving the cable connected to
the headliner, undoing the upper screws
indicated, and detach the spring (4) from the
bracket.
At the top, remove the left hand headliner
tensioner cable (F) from the Front Roof shell
kinematics, leaving the cable connected to
the headliner, undoing the upper screws
indicated.
At the bottom, remove the left hand headliner
tensioner cable (F) from the roof kinematics,
undoing the two screws indicated.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Hold the Front Roof shell up together with the
Rear Roof shell and remove the rod
(AV
8178) fitted previously.
Electrically bring the RHT into the intermediate
position, with the Rear Roof shell over the
Front Roof shell and with the Tonneau Cover
completely opened.
Advertisement
