Advertisement
Replace the Tonneau Cover hydraulic cylinders (
Carry out the refitting procedure ONLY.
The left hand Tonneau Cover hydraulic cylinder and the relative hydraulic pipes must be passed under
the electrical connections.
Refit the RHT hydraulic system pump (
Refit the DCT gearbox ECU (
Refit the luggage compartment lid (
Connect the battery (
Adjust the RHT (
Check and adjust the door window (
Check and adjust the quarterlight (
Refit the roof trim panels (
Refit the luggage compartment trim panels (
Adjusting the RHT
Tightening torque
Rear storage lock receivers
Front storage lock receivers
CAUTION
If the RHT open or close cycle is not completed, the hydraulic system remains pressurised for up to 5
minutes after the control button is released. After this period, the system emits a warning sound to warn
the driver and any persons in the vicinity that the system is no longer pressurised and that components of
the RHT system may drop without warning.
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
F2.11).
E3.02).
F2.01).
E6.02).
E3.08).
E3.07).
E4.04).
Fit the cable leading from the Tonneau Cover
behind the pump and connect the connector
(1).
E6.12).
E6.12).
E4.07).
M6x20 screw
Screw
Nm
Class
9 Nm
B
9 Nm
B
Advertisement
