Advertisement
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
Manually bring the Front and Rear Roof shells together into the intermediate position, with the Front Roof
shell in its respective seat, in contact with the windscreen cross member, and the Rear Roof shell over
the Front Roof shell.
Block the right hand flap (F) in the open position,
applying a strip of adhesive tape (26).
Block the left hand flap (F) in the open position,
applying a strip of adhesive tape (26).
With the assistance of another operator, fit the
Tonneau Cover complete with kinematics (D),
into the relative seat in the luggage
compartment, fitting the rear first and then the
front.
Fit the Tonneau Cover, complete with kinematics
(D), onto the relative locator pins on the
bodyshell.
Advertisement
