Ferrari California Workshop Manual page 1400

Hide thumbs Also See for California:

Mixing Ratio

* For exceptional conditions of temperature and humidity (> 35°C / > 70%) and for

large areas use Slow Reactive Thinner D833

Number of coats: 2-3

Flash-off between coats at 20°C: 5 minutes

Drying times:

Dry to sand at 20°C

Dry to sand at 35°C

Total dry film build: 15 - 20 µm

Repair / Recoating:

Deltron D821 – 2K HS Chip Resistant Primer [Primer Surfacer]

For detailed information see technical datasheet "104 – Deltron D821"

For detailed information see chapter / section "Sanding and Cleaning"

Hardener and thinner selection: for detailed information see chapter / section "Hardeners and

Mixing Ratio

Number of coats: 2-3

Flash-off between coats at 20°C: 10 – 15 minutes

Flash-off before stoving at 20°C: 10 – 15 minutes

Drying times:

Dustfree at 20°C

Touch dry at 20°C

Through dry at 20°C

Through dry at 60°C

Through dry (IR)

D832 / D833 *

30 - 45 minutes (D832)

30 - 45 minutes (D833)

with P400 (dry), if necessary

Overcoat / Re-coat time at

at 20°C (airdrying): 30 – 40 minutes

1,5 - 2 hours (tinted: 2 – 2.5 hours)

20 – 25 minutes tinted: 30

minutes (metal temperature)