Advertisement
Upper centre rollbar mounting
Remove the centre passenger compartment trim panel.
Move the RHT roof electrically into the Spider position, without closing the Tonneau Cover.
Disconnect the battery (
F2.01).
Detach both upper rollbar covers (A).
Undo the five indicated lower fastener screws for
the centre trim panel (B).
On the left-hand side, undo the two upper
fastener screws indicated for the centre trim
panel (B).
On the right-hand side, undo the two upper
fastener screws indicated for the centre trim
panel (B).
Remove the centre trim panel (B) from the
vehicle.
Advertisement
