Advertisement
Adjust the Rear Roof shell striker plates on the Tonneau Cover (
Perform ONLY when fitting a new Tonneau Cover
Refit the luggage compartment trim panels (
Refit the rear trim panels.
Refit the luggage compartment lid (
Fit a 10 mm wide hex-head wrench in the seat
indicated on both the left and right hand Rear
Roof shell kinematics.
On the right hand Rear Roof shell kinematics,
turn the hex-head wrench clockwise to lock
the right hand Rear Roof shell kinematics.
Turn the wrench slowly and carefully to prevent
On the left hand Rear Roof shell kinematics, turn
the hex-head wrench counterclockwise to
lock the left hand Rear Roof shell kinematics.
Turn the wrench slowly and carefully to prevent
If the Rear Roof shell kinematics hooks fail to
engage with the Rear Roof shell striker
plates, loosen the screws fastening the
Tonneau Cover and adjust the cover, adding
or removing shims until the Rear Roof shell
kinematics hooks are able to engage with the
respective striker plates on the Tonneau
Cover.
E4.07).
E3.02).
damage to the right hand Rear Roof shell
kinematics.
damage to the left hand Rear Roof shell
kinematics.
E6.11).
Advertisement
