Advertisement
Test the function of the RHT roof, performing three open/close cycles.
Refit the passenger compartment trim panels (
Refit the upper lateral trim panel.
Replacing striker plates on luggage compartment lid
Tightening torque
Fastening striker plates on luggage compartment
lid
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Hold the Rear Roof shell up manually.
Refit the rubber pad (3) in the respective seat on
the Rear Roof shell kinematics.
Carry out the operation on both Rear Roof shell
kinematics assemblies.
Manually move the Rear Roof shell to bring it
over the Front Roof shell.
Refit the rubber pad (1) in the respective seat on
the striker plate (A).
Carry out the operation on both striker plates.
E4.04).
M6x18 screw
Nm
Class
9 Nm
B
Advertisement
