Advertisement
Definitively tighten the four RHT fastener screws mentioned above.
Tightening torque
M10x75 screw
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
Manually bring the Front and Rear Roof shells together into the intermediate position, with the Front Roof
shell in its respective seat, in contact with the windscreen cross member, and the Rear Roof shell over
the Front Roof shell.
Refit the rollbar (
Nm
43 Nm
F4.05).
Pretighten the front right hand screw (21)
fastening the RHT assembly.
Tightening torque
Pretightening torque, M10x75
screw
Class
A
Undo the indicated nuts and remove the relative
screws fastening the RHT assembly from the
lifting hook.
Lift the lifting hook with the hydraulic hoist and
move away from the vehicle.
Nm
10 Nm
(AS
107567)
Class
0
Advertisement
