Advertisement
Electrically bring the RHT into the intermediate
position, with the Rear Roof shell over the
Front Roof shell and with the Tonneau Cover
completely opened.
Remove the rubber pad (1) from the respective
seat on the striker plate (A).
Carry out the operation on both striker plates.
Manually check that the roller (2) turns freely.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Move the Rear Roof shell manually, holding it
above the Front Roof shell.
Remove the rubber pad (3) from the respective
seat on the Rear Roof shell kinematics.
Carry out the operation on both Rear Roof shell
kinematics assemblies.
Advertisement
