Advertisement
Refit the steering column trim panel (
Refit the steering wheel (
Connect the battery (
Gearshift paddles (mechanical gearbox)
The driver can select the gears, with the clutch pedal pressed, by means of the gearshift paddle located on
the centre console, by turning it in the shown positions (R, 1, 2, 3, 4, 5, 6).
To engage reverse gear (R) it is necessary to press the paddle down and then move it in the relevant position.
E4.02).
E5.09).
F2.01).
Tighten the lower screw (1) fastening the F1 shift
paddles.
Tightening torque
Screw
Nm
Class
4 Nm
B
Advertisement
