Advertisement
Match the numbers on the hydraulic pipes and
put the forks (2) in the relevant positions on
the hydraulic pump (A), fitting gently the
hydraulic pipe unions in the relevant holes.
Each pipe is marked with a number indicated
also on the hydraulic pump (A) in the
relevant seat on the pump to avoid incorrect
pipe refitting.
Check that the hydraulic pipe unions are
securely fastened to the hydraulic pump.
Tighten the retainer fork screws (2) to the
hydraulic pump (A).
Tightening torque
Screw
Position the pipes as originally fitted.
Fit the hydraulic pump (A) in its seat and fasten
to the left hand Tonneau Cover kinematics by
tightening the three screws indicated.
Tightening torque
M6x22 screws
Connect the connectors (1) of the hydraulic
pump (A).
Use only the prescribed fluid - Pentosin CHF
11S.
After replacing the pump, undo the filler plug (5)
and using a suitable funnel, fill the tank with
the specified fluid up to the MAX level.
Nm
Class
7 Nm
A
Nm
Class
9 Nm
B
Advertisement
