Advertisement
Driving positions (optional Full Electric, driver seat only)
Use the three buttons (E) as described as follows to memorise or recall up to three different driving positions
(function only enabled in key-on state):
to memorise a driving position setting, adjust the seat, steering wheel and external rear view mirrors as
desired using the respective controls, then press and hold any one of the three buttons (E) (each button
corresponds to one memorisable position) for at least three seconds, until a double beep is emitted
confirming that the setting has been saved. Adding a new driving position setting to the memory
automatically replaces the setting assigned previously with the same button.
to recall a memorised driving position, press the relative button (E) and release within three seconds.
Driving position selection may not be recalled while the vehicle is in motion.
The movements begin once one of the buttons (E) is released.
After releasing one of the buttons (E), if the vehicle starts to move before the seat, steering wheel and
external rear view mirrors have reached their respective memory positions, they will continue moving until
the selected positions are reached.
If the memorised longitudinal position for the passenger seat is less than 50 mm from the rear travel limit, the
seat will stop at approximately 50 mm from the rear travel limit when the memorised seat position is
recalled. The seat may then be moved beyond this point using the forward/backward adjustment control.
Pressing any of the seat adjustment control buttons or memory buttons immediately arrests the automatic
function in progress (e.g. memory recall and driver or rear seat easy entry/exit function UP TO Assembly
No. 106216).
Heating (optional Full Electric)
Turn the dial (F) to switch on the heated seat function and set the temperature.
Turning the dial to "0" switches the seat heating function off.
Tipping the backrest
Lift the handle (G) to tip the backrest forwards.
Adjusting the headrests
Advertisement
