Advertisement
Adjust the RHT (
Adjust the lateral position of the rear storage lock receiver so that the kinematics is perfectly centred
with the respective receiver.
Refit the luggage compartment trim panels (
Replacing caps on rear storage lock receivers
Operate the RHT roof electrically to open the Tonneau Cover completely.
Replacing pads of the Rear Roof shell kinematics
E6.02).
Undo the two screws (1).
Remove the rear storage lock receiver (A) and
replace it.
Fit the new rear storage lock receiver (A) on the
relevant mounting bracket.
Hand tighten the two screws (1).
E4.07).
Press on the indicated points and remove the
cap (A).
Replace the cap (A).
Position the cap (A) until it clicks audibly into
place.
Advertisement
