Advertisement
Clearcoat (blending
areas)
Cleaning
Clean any old paint (OE finish) thoroughly with water first to remove any water soluble dirt.
Clean with a suitable pre-cleaner, e.g. D837 DX330 Spirit Wipe o D845 DX310 High
Strength Degreaser. If there is any VOC legislation in force, use D842 DX380 low VOC
Cleaner or D8401 Waterborne low VOC Cleaner. If using D842, rinse the surface with T494
Envirobase thinner immediately after degreasing, then dry the panel surface.
P1000 - P1200, 3M Soft Pad ultrafine
Advertisement
