Advertisement
Replace the engine compartment lid lock (
Attach the Bowden cable and adjust the lock.
Refit the windscreen wiper linkage (
Refit the engine compartment cosmetic shields (
Opening the luggage compartment lid
Fit the release handle (B) in the relative seat.
Tighten the two screws indicated fastening the
release handle (B).
Tightening torque
Screw
UP TO Ass.ly No. 86053
Attach the indicated clips fastening the Bowden
cable (A) on the right hand side of the engine
compartment.
Note that not all the fastener clips are shown in
the image aside.
Attach the indicated clips fastening the Bowden
cable (A) on the left hand side of the engine
compartment.
Note that not all the fastener clips are shown in
the image aside.
E5.14).
E3.09).
E3.13).
Nm
Class
2.6 Nm
C
Advertisement
