Advertisement
Remove the rod
(AV
tape (8) to mark the original position of the
two bumpers (M).
Loosen the four dowels indicated fastening the
two bumpers (M).
Move the two bumpers (M) towards the ends of
the rod
(AV
8178).
Tighten the four dowels indicated fastening the
two bumpers (M).
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Manually move the Rear Roof shell (1) towards
the rear of the vehicle.
Lock the Rear Roof shell kinematics in the safety
position, fitting the special rod
shown in the image aside.
8178) and use adhesive
(AV
8178) as
Advertisement
