Advertisement
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
Manually move the Front and Rear Roof shells together into the luggage compartment.
Refit the passenger compartment trim panels (
Connect the connector (19) onto the roof ECU.
Fit the pretensioner guard (27) in the relative
seat and fasten by tightening the two screws
indicated.
Fit the pretensioner (18) in the relative seat on
the bodyshell and fasten by tightening the
screw (17).
Tightening torque
Screw
Connect the connector (16) and reapply the
protective foam rubber onto the connector.
Repeat the procedure on the left-hand side.
E4.04).
Nm
Class
40 Nm
A
Advertisement
