Advertisement
Close the luggage compartment lid.
Check that the vertical gap (along the "Z" axis)
between the Tonneau Cover kinematics and
the Front Roof shell kinematics is 25 ± 2 mm.
Electrically bring the RHT into the intermediate
position, with the Rear Roof shell over the
Front Roof shell and with the Tonneau Cover
completely opened.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Open the luggage compartment lid, pressing on
the two hooks (15) (one per side) fastening
the luggage compartment lid to the Tonneau
Cover kinematics.
Advertisement
