Advertisement
The vehicle speed is shown also on the DOT MATRIX display.
"Shift Light Indicator" message
On vehicles with DCT gearbox, the signalling occurs only in the "manual" mode with the display of a
small "arrow" on the upper left-hand side of the DOT MATRIX display which can be stationary or flashing
(3Hz d.c.50%) depending on the value of the signal received.
The arrow symbol appears to indicate the recommended time to upshift at the lowest speed possible
(sustainable by the vehicle in each gear) to reduce fuel consumption.
The relevant vehicle speeds for each upshift are as follows:
1st > 2nd: 12.5 Mph
2nd > 3rd: 17.5 Mph;
3rd > 4th: 22.5 Mph;
4th > 5th: 27.5 Mph;
5th > 6th: 32.5 Mph;
6th > 7th: 37.5 Mph.
Advertisement
