Ferrari California Workshop Manual page 1397

Hide thumbs Also See for California:

E7.02 Use of hardeners and diluents

The following tables show which hardeners and thinners have to be used together with the corresponding

PPG products depending on the ambient temperature.

N.B.: When using Deltron D821 primer as non-sand surfacers, it is recommended that the same

hardener is used in subsequently applied direct gloss colour or clearcoat. Consult the

appropriate technical datasheet(s) to identify a suitable common hardener.

D851 / for detailed information see technical datasheet "02 – Deltron BC"

For optimum durability and adhesion it is recommended to mix Deltron BC 10 : 1

with D841 MS Hardener, and then thin 1 : 1 with GRS Thinner prior to

application. Potlife of the activated basecoat is in excess of 48 hours. Application

and drying properties are unchanged.

Deltron D821 – 2K HS Chip Resistant Primer

HS Hardeners

Deltron BC – Solventborne Basecoat

Deltron D8109 – UHS low VOC Clearcoat

D868 / for detailed information see technical datasheet "171 –

Deltron D8109"

D865 / for detailed information see technical datasheet "171 –

Deltron D8109"

D886 / for detailed information see technical datasheet "171 –

Deltron D8109"

Deltron D8105 – CeramiClear

HS Hardeners

MS Hardeners