Advertisement
Pressing one of the UP/DOWN buttons once instantly recalls the specific screen. Pressing one of the buttons
again changes the setting. Backlighting brightness cannot be set to zero and changes to the setting are
effective immediately.
During adjustment, the specific message is displayed together with the bar graph (consisting of 8 bars
representing brightness levels), and the bars on the graph light up or extinguish one at a time as the
UP/DOWN buttons are pressed.
The screen is displayed over any currently active screen, which remains in the background.
The screen disappears automatically, revealing the previously active screen, if no input is received for 5
seconds or if the MODE button is pressed.
While failures are displayed, the backlighting brightness setting may not be adjusted (UP/ "MODE" buttons
disabled). If active, the Dimming screen is cancelled by the occurrence of a fault event.
With the trip odometer flashing (following a reset request), activating the function only displays the bar graph
showing the level memorised previously and adjustment is not possible, as the "UP" / "DOWN" buttons
are only usable for the trip counter function.
In all cases, brightness level is always adjustable (adjustment effective from the first time one of the
UP/DOWN buttons is pressed); the dimming screen is displayed over the currently active screen, which is
displayed in the background and continues with its respective display cycle.
Analogue electronic speedometer
The speedometer has a red needle against a white scale.
The speedometer needle indicates 0 (zero) Mph (positioning error ± 2 degrees).
Advertisement
