Advertisement
Irrespective of the currently active main screen, the message "Check" appears immediately in area D of the
TFT display, against a grey background and together with five "segment symbols" that are highlighted in
sequence counting the five seconds of the test cycle. .
Press (A) ENGINE START to start the engine.
If the following conditions have been met:
1) the initial check cycle period for the instrument panel warning lights has elapsed;
2) engine speed has exceeded and remained above 700 rpm for at least 3 seconds;
3) the check cycle has been completed successfully (no failures);
4) the Service information has been displayed for five seconds.
Advertisement
