Advertisement
Check that the Rear Roof shell is flush with the
Tonneau Cover: the gap must be 5.0 + 2.0/-
mm.
If the above condition is not met, loosen the Rear
Roof shell fastener screws and add or
remove fork shims.
Connect the battery (
Raise the door windows and quarterlights
completely.
Check that the step between the Rear Roof shell
and the quarterlights is - 8.5 ± 1.0 mm.
If the above condition is not met, loosen the
Front Roof shell fastener screws, align
correctly and, if necessary, add or remove
fork shims.
Check that the Rear Roof shell is flush with the
Front Roof shell: the gap must be 6.0 + 2.0/-
1.0 mm.
If the above condition is not met, loosen the Rear
Roof shell fastener screws and align correctly.
Check that the step between the Rear Roof shell
and the Front Roof shell is 0.0 ± 1.0 mm.
If the above condition is not met, loosen the Rear
Roof shell fastener screws and add or
remove fork shims.
Check that the step between the Rear Roof shell
and the Tonneau Cover is between - 4.7 and -
8.0 mm with a variation in the Y axis of ± 2.0
mm in the relative section.
F2.01).
Advertisement
