Advertisement
Press the DISP button (A) to display the following screens (in order):
SPORT screen
TYRES screen (tyre pressure and temperature)
TRIP A/B screen
MENU screen
Pressing DISP (A) again from the final screen returns to the first screen listed.
Pressing the Display button with the ENGINE START screen on the display restores the main screen saved
previously (even after Key-off/Key-on).
The UP (B) and DOWN (C) buttons have the following functions:
selecting main Menu options or submenu options (with Menu screen active);
setting display brightness (with Menu screen not active);
setting twilight sensor sensitivity (following specific command).
Press and release the MODE button (D) within 2 seconds to:
toggle between total odometer count, TRIP A "Travel distance", TRIP B "Travel distance" (if enabled)
and "Range" (with Menu screen not active) in the E2 area of the display;
reset Trip A or Trip B count depending on flashing trip counter (with Menu screen not active and with
flashing odometer);
confirm selected function (with Menu screen active);
conform setting/modification made and return to previous screen (to the same option) when in a submenu
function accessed from the main menu (with Menu screen active);
save modifications made (with Menu screen active);
interrupt display of check cycle stages at key-on (skip current stage and proceed to the next);
interrupt ("Escape" function) failure/warning display cycle.
Press and hold the MODE button (D) for 2 seconds or more to:
return to the option in the previous menu level (with Menu screen active, when in submenu functions);
set Trip A counter to flashing mode in area E2 of the display, if the counter is active in the area reserved
for the total odometer, TRIP A or "Range" (with Menu screen not active);
set Trip B counter to flashing mode in area E2 of the display, if the TRIP B counter is active in the area
(with Menu screen not active).
Advertisement
