Advertisement
Refit the door panel (
Connect the battery (
Fitting the external rear view mirrors
The external rear view mirrors are supplied as spare parts as disassembled units ready for painting. After
painting, the mirrors must be assembled as follows.
The procedure given is for the driver side external rear view mirror; the driver side mirror differs from the
passenger side mirror in that it also includes the external temperature sensor.
E3.08).
F2.01).
Fasten the two retainer clips indicated securing
the external rear view mirror cable (B) to the
door frame.
Note that this photo was taken from above and
without the seals installed to illustrate the
operation more clearly.
Fit, replacing if necessary, the foam rubber
covering (2) in its original position around the
connectors and fit a new clamp (1).
Advertisement
