Advertisement
Repeat the above procedure for the left hand
headliner tensioner cable (H), but connecting
the spring (5) to the strap instead of
tightening the indicated fastener screw on the
Rear Roof shell.
The indicated screw cannot be removed as it is
covered at the top left by the sensor, as
shown in the photo aside.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Hold up the Rear Roof shell (1) and remove the
rod
(AV
8178) fitted previously.
Manually move the Rear Roof shell (1) toward
the front of the vehicle, bringing it over the
Front Roof shell.
Remove the rod
(AV
Loosen the four dowels indicated fastening the
two bumpers (M).
Move the two bumpers (M) towards the centre of
the rod
(AV
8178), up to the markings (8)
made with adhesive tape.
Tighten the four dowels indicated fastening the
two bumpers (M).
8178).
Advertisement
