Advertisement
CAUTION
Danger of accident! At least two operators are required to manually move the components of the RHT roof,
working slowly and in a coordinated fashion.
When handling the tonneau cover manually, the tonneau cover fastener latches may damage the
blocks fastened to the kinematics of the tonneau cover.
The blocks fastened to the kinematics of the tonneau cover protect the flaps. As a result, damage to
the blocks will also result in damage to the flaps.
Before handling the tonneau cover manually, check that the latches fastening the tonneau cover are
correctly released.
Manually open the Tonneau Cover completely.
Tighten the inner screw (6) fastening the
Tonneau Cover (A) to the relative right-hand
side kinematics.
Tightening torque
M8x50 screw
Tighten the inner screw (5) fastening the
Tonneau Cover (A) to the relative left-hand
side kinematics.
Tightening torque
M8x50 screw
Nm
Class
24 Nm
A
Nm
Class
24 Nm
A
Advertisement
