Advertisement
Close the luggage compartment lid.
Electrically bring the RHT into the intermediate position, with the Rear Roof shell over the Front Roof shell
and with the Tonneau Cover completely opened.
Move the RHT roof electrically to bring the Front and Rear Roof shells into the luggage compartment
together, without closing the Tonneau Cover.
Remove the safety clip (14).
Detach the spring (1) for the flap control cable
(G) for the right hand Tonneau Cover
kinematics.
Detach the clip (15) fastening the flap control
cable (G) for the right hand Tonneau Cover
kinematics.
Arrange the flap control cable (G) so that is does
not obstruct the movement of the RHT during
the subsequent steps.
Block the flap (H) in the open position, applying a
strip of adhesive tape (16).
Remove the cover (2).
Advertisement
