Advertisement
Repeat the luggage compartment lid closing test described previously.
Refit the luggage compartment trim panels (
Refit the sill protector.
Adjusting the luggage compartment lid lock
Tightening torque
Fastening luggage compartment lid lock
Remove the luggage compartment trim panels (
Remove the luggage compartment lid trim panel.
Loosen the two screws indicated.
Adjust the striker (B) along the Z axis, then
tighten the two screws indicated.
Tightening torque
Screw
Fit the bracket (A), complete with DCT ECU, in
the relative seat.
Tighten the three screws indicated fastening the
DCT ECU mounting bracket (A).
Tightening torque
Screw
E4.07).
Screw
E4.07).
Nm
Class
20 Nm
Nm
Class
9 Nm
Nm
Class
20 Nm
A
B
B
Advertisement
